1>. ATM-Series, Flange Alignment Tools
Enerpac ATM-Series tools rectify twist and rotational misalignment quickly, safely and without the need for an external power source
Appropriate for use on most ANSI, API, BS and DIN flanges
Reduces set-up time: no need for chains, pulleys or rigs
Safety strap helps provide secure operation
Can be installed and used in any position
Portable, lightweight design enables easy transport and use, even in remote locations.
Maximum
Lifting Force |
Model
Number |
Minimum Bolt Size |
Flange Wall Thickness
(including gap between flanges) |
Weight |
| (kN) |
(ton) |
(mm) |
(in) |
(mm) |
(in) |
(kg) |
(lbs) |
| 10 |
1 |
ATM-2 |
16 |
.63 |
14 - 82 |
.55 - 3.29 |
1,6 |
3.5 |
| 40 |
4 |
ATM-4 |
24 |
.95 |
30 - 133 |
1.18 - 5.23 |
8,6 |
19 |
| 90 |
9 |
ATM-9 * |
31,5 |
1.24 |
93 - 228 |
3.66 - 9.00 |
14,5 |
32 |
2>. Joint Assembly Tools
Correct joint assembly and alignment are crucial to joint integrity Whether you are pulling in a pipeline connection, fitting winches to a boat deck or overhauling a dragline, the wide range of Enerpac's Joint Assembly products provide simple-to-use, dependable solutions to the time-consuming, less accurate traditional methods.
3>. FF-Series, Mechanical Flange Face Tool
Enerpac's FF120 Quickface is a lightweight, easy to use, safe and compact tool that can be used to quickly resurface a flange face. It is easy to use and only requires one person to operate.
Makes refacing easy - hand operated machine tool can be set up anywhere without the need for air, electric or hydraulic power
Lightweight and portable (15 kg in storage box)
Adjustable cutting head for reface of flat flange surfaces of pipes with flange OD facing range 25,4 - 304,8 mm [1 - 12 inch]
Interchangeable collets for ID mounting range 25,4 - 152,4 mm [1-6 inch] allow the user to work on many different flanges with minimal time between set-ups
Interchangeable lead screws suitable for refacing damaged raised-face (RF), flat-face (FF) or lens-ring joint flanges
Tool body with expanding collets centers itself providing real concentric operation
Pipe Flange Cutting
Diameter Range |
Internal Pipe Mounting
Diameter Range |
Cutting Resultant
Roughness |
Model
Number |
Weight |
| (mm) |
(inch) |
(mm) |
(inch) |
(Ra ) |
(kg) |
| 25,4 - 304,8 |
1.0 - 12.0 |
25,4 - 152,4 |
1.0 - 6.0 |
3,2 - 12,5 |
FF-120 |
6,8 |
){kind=link}
){kind=link}